One of the biggest challenges for people who have just started to wear wigs or toupee faces is how to use the adhesive best to secure the wig or toupee. Getting the best use of the wig glue or toupee tape requires knowledge of the best application techniques that will allow the toupee to remain secure for a long time without needing the application. Similarly, many face challenges with wig removal, which often ends up causing damage to the scalp or the wig. In this article, we share tips on how to overcome these issues.
Tips for Perfect Application
If you follow the steps mentioned below before applying your toupee or wig adhesive, you can ensure that the wig is attached securely to your scalp and does not require frequent adhesive reapplications. Here’s what you do:
- Pre-application Preparation: Before applying your toupee or wig adhesive, whether you choose wig glue or toupee tape, the first step is to prepare your scalp and hair piece. You must ensure your scalp is clean by washing it thoroughly using shampoo or alcohol wipes to eliminate all the oil and buildup. After this is done, dry the area, ultimately ensuring it is free from any moisture. This is important because any moisture, dirt, or oil will prevent the adhesive from performing well.
Another way to prepare for application is to prepare your adhesive. For instance, if you take a toupee tape, measure the area where the tape has to be applied and cut the tape into the desired length. Get all the pieces ready similarly. If you are using wig glue, prepare the glue and application brush to ensure that you can rapidly apply it to a uniform layer.
- Application Process: Once you have prepared everything, it is time to apply the adhesive properly to ensure a secure fit. The application process will be different depending on the type of adhesive you have chosen, whether tape or glue. You need to follow the precise steps mentioned below.
- If you are applying wig glue, spread some amount of glue on your applicator brush evenly along your hairline. Ensure you apply a thin layer and do not overload the glue, which will have no impact and cause more difficulties. After using the glue to your hairline, give it about 30 seconds to dry out slightly; at this point, it will have a tacky or sticky consistency. Ensure you provide the precise amount of time and do not wait too long or too little, as super-dried-out glue will not allow the wig to stick properly, and very wet glue will cause the wig to slip.
- If you are using toupee tape, the process can be much simpler and cleaner than glue. When using this tape, take your strips one by one and place them along the edges of the toupee or the wig. Depending upon your requirements, place more strips along the perimeter and avoid putting the tape around the center unless necessary. When you add adhesive to the center of the scalp, it can get uncomfortable over a period of time. Once all the strips are placed, place the wig securely on your head and press down gently yet firmly to ensure that the wig is properly settled. Moreover, transferring heat from your hand onto the wig will activate the adhesive better, allowing for a much more secure Bond.Â
Tips for Easy Removal
To ensure you do not hurt yourself or damage the wig during removal, it is essential to take a careful and gentle approach when removing the hairpiece from your head. This is what you need to do:
- Get an Adhesive Remover: Whenever you have attached your hair piece with tape or glue, ensure you always have a good-quality adhesive remover. This is essential because the adhesive remover allows you to gently dissolve the adhesive, making removing the wig as simple as lifting the hairpiece. With an adhesive remover, you eliminate the need to tug at the hairpiece, try to remove it from the scalp, and hurt the scalp in the process.
When using an adhesive remover, pay attention to the instructions on the product. Generally, you need to dab the remover gently on your scalp around the area where you have put the adhesive. In other cases, you must spray it wherever you place the glue. After application, you must wait a few minutes for the adhesive to dissolve. Carefully lift the hair piece gradually to assess whether the adhesive has been completely dissolved. Use more remover if needed, and gently lift the wig.
- After you have successfully removed the hairpiece, make sure that you clean your scalp thoroughly using a cleanser or an alcohol wipe, getting rid of all the remaining residue of the adhesive and the adhesive remover. Once you have cleaned your scalp, be sure to also moisturize it to protect the skin.
Conclusion
A wig adhesive is essential for anyone who wears wigs or toupee. However, many people do not know how to use these products appropriately, leading to challenges in keeping their hair pieces secure for long durations. By learning the proper mechanism for application and removal, you ensure that your wig stays on securely for long periods without frequent reapplication requirements and that your wig and scalp are protected from damage. This, in turn, also ensures that the wig lasts you for a longer time.Â